Kiirjahutuskamber Metos RCSG-601-R-RTF-RC

With Metos Ready RCS Blast chilling and freezing rooms you immediately have available the optimal technologies and solutions to meet every request, optimize inventory and purchases, reduce waste, and make your work easier, gaining time and opening up new opportunities for you. The Ready cold rooms make the most of the available space, in the most diverse situations: from the laboratory, to the canteen, to the cooking centre, to the restaurant. Compatible with all laboratory or oven trolleys, they have been tested in compliance with the EN17032 standard, even with large loads and in the most demanding work situations.

Thanks to the optimization of the airflow, the result of in-depth research and numerous tests to obtain maximum results. Ready cells have achieved a significant increase in the quantity of product blast chilled and equally sharp reduction in the length of the work cycles. All this with significant energy savings: an andavantage for the environment as well as for the budget.

STRUCTURAL CHARACTERISTICS

- Remote cooled connection, cold machine not included
- AISI 304 stainless steel panel construction with 80 mm-thick polyurethane foam insulation
- Stainless steel exterior (Scotch-Brite satin finish)
- Copper-aluminium evaporating coil, cataphoresis-painted with non-toxic epoxy resin, installed on the side, together with fairing that can be opened via a special safety key for easy and proper maintenance; all PED and UL-tested at a pressure of 30 bar
- Highly ventilated evaporator to ensure the cooling system’s maximum efficiency
- Anti-condensation heating element fitted under the door seal
- 2 doors with a rubber sweeper seal, complete with closing hinges
- Control-activated chamber sanitisation system with active ions (HI- GIENE)
- Optional access ramp equipped with a liquid-collecting grille and filtering system
- External bumper to protect the control panel
- Recessed or above-floor installation possible
- Set up as standard for R452A refrigerant fluid
- Cell fitted with easy-to-clean rounded corners and AISI 304 30/10 stainless steel internal bumpers
- All the surfaces, body’s metal components and internal reinforcements are made of AISI 304 stainless steel and have been tested to withstand a saline environment for at least 800 hours
- Easy-to-clean interior, thanks to the suspended evaporator that quickly removes the washing water, according to the indications of the NFS and UNI EN 14159 standards
- Cooling capacity expressed at evaporation temperature -25 °C and condensation temperature at + 45 °C
- Working temperature +3 / -40 °C

EQUIPPED INTERIOR
- Thick stainless steel internal bumper to prevent any trolley-related damage
- Quick-release heated core probe with 4 measuring points

COMMANDS, CONTROLS AND SAFETY DEVICES
- Connectivity (optional) USB connection for uploading and downloading data/recipes
- 5” high-definition TOUCH display is easy to use
- Automatic storage at the end of the blast chilling cycle
- Electrical connections at the front of the padlocked panel
- Quick-release heated core probe with 4 measuring points

CAPACITY
- capacity 3x GN 1/1 - EN1 trolleys
- cooling capacity 360 kg (90min/+90…+3°C) and freezing capacity 240 kg (240min/+90…-18°C)

Options with extra cost:
- Left hinged door PSC
- Access ramps not included in the price ramp for 181, RCSG-_01
- Disassembled delivery 601-602, 801-802
- Special voltages and frequencies on request
- Dashboard on the right side and opposite hinged doors